Premium industrial laser chiller manufacturer? Since 2002, S&A Chiller has been dedicated to industrial chiller units and serving a wide variety of industries, especially the laser industry. Our experience in precision cooling enables us to know what you need and what cooling challenge you are facing. From ±1C to ±0.1C stability, you can always find a suitable water chiller here for your processes. To produce the best quality laser water chillers, we introduced advanced production line in our 18000m2 production base and set up a branch to specifically manufacture sheet metal, compressor & condenser which are the core components of water chiller. Annual production capacity now reaches 100,000+ units per year. Find additional information at industrial chiller manufacturers.
In the actual use, there are often some urgent problems that need to be solved in mold. And the most important one is the cleaning of the mold. Some metal molds are used to be the prototyping of high temperature hot melting material. When the products have finished and are taken out from the molds, there are often material residue left on the molds. This requires people to clean the molds, for this will affect the next product making, but that would be quite time consuming. What’s more, molds are easy to get rusty. Since most of the industrial molds are made from steel, they would become rusty after being used for a period of time. And molds need to be cleaned properly before they are used on the machine. However, traditional cleaning would cost a huge labor and cost, which is very bad for the manufacturers.
As we know, ultrafast laser refers to pulse laser with pulse width of equal or less than picosecond laser level. That makes it have very high peak power. For transparent materials like glass, when the super high peak power laser is focused inside the materials, the non-linear-polarization inside the materials changes the light transmission feature, making the light beam to self focus. Since the peak power of ultrafast laser is so high, the pulse keeps focusing inside the glass and transmitting to the inside of the material without diverging until the laser power is not enough to support the ongoing self focusing movement. And then where the ultrafast laser transmits will leave silk-like traces with diameter of several micrometer. By connecting these silk-like traces and imposing stress, the glass can be cut perfectly without burr. In addition, ultrafast laser can perform curve cutting quite perfectly, which can meet the increasing demand of curved screens of the smart phones these days.
In practical application scenarios, the laser processing requirements of most common products in industrial manufacturing are within 20 mm, which is just in the range of lasers with a power of 2000W to 8000W. Users are very aware of their products and processing needs, pay more attention to the stability and continuous processing capabilities of high-power machines, and will choose products that better meet their own needs. Laser processing equipment in the medium and high power segment can meet most processing needs, with high-cost performance, and the industry chain is relatively mature and perfect. It will occupy the most important market in recent years and the next few years.
If you are looking for rack mount chillers for your fiber laser, the RMFL series are the perfect choices. They are specially designed for handheld fiber laser welding machines up to 2KW and also have the dual temperature function. CO2 laser is commonly used in laser cutting, laser engraving and laser marking on non-metal materials. But whether it is DC tube (glass) or RF tube(metal), overheating is likely to happen, causing expensive maintenance and affecting the laser output. Therefore, maintaining consistent temperature is of utmost importance to CO2 laser. Read more details on https://www.teyuchiller.com/.