Pcb manufacturer and supplier 2022? Peelable mask are applied by screen-printing, act as in-process protection and are removed after processing at the assembler. Because the fabricator can apply the mask in any design, they can create one fluid piece which will allow the customer to peel the entire design off in one pull. Peelable mask provides protection in soldering processes like wave soldering, reflow soldering or hot air solder leveling(HASL). Rebiable, time-saving and cost-saving in their application, they have long surpassed manual masking with heat-resistant tapes. Find even more information at pcb prototype assembly.
Advantage of MCPCB: Some LEDs dissipate between 2-5W of heat and failures occur when the heat from a LED is not properly removed; a LED’s light output is reduced as well as degradation when the heat remains stagnant in the LED package. The purpose of a MCPCB is to efficiently remove the heat from all topical IC’s (not just LEDs). The aluminum base and thermally conductive dielectric layer act as bridges between the IC’s and heat sink. One single heat sink is mounted directly to the aluminum base eliminating the need for multiple heat sinks on top of the surface mounted components.
The PCB assembly process is a combination of the SMT(Surface Mounting Technology) process and the DIP(Dual In-line Package) process. According to the requirements of different production technologies, it can be divided into a single-sided SMT placement process, a single-sided DIP insertion process, a single-sided mixed process, single-sided placement and insertion Mixed process, double-sided SMT mounting process and double-sided mixed process, etc. The PCBA process involves board cutting, printing, patching, reflow soldering, plug-in, wave soldering, testing and quality inspection.
There are total 420 highly trained full-time employees with land area 30000 square meters and building area 18000 square meters in our PCB plant, we mainly focus on high-mix, low to medium volume pcb fabrication as well as quick turn pcb prototype to meet 24 hours delivery for double sided PCB, 48 hours for 4 to 6 layers and 72 hours for 8 or more high multilayer PCB at the fastest. The production capacity is 25000 square meters and more than 3000 varieties per month, the printed circuit boards we manufactured are widely used for different electronics industries, such as telecommunication, consumer electronics, computer, medical, automotives, military and so on, more than 60% of our PCB board are exported to Europe, North America and other Asian countries. Find even more info on atechpcb.com.
Flat Flexible Cable (FFC) is made of PET insulation material and extremely thin tinned flat copper wire, it has free bending and folding, thin thickness, small size, simple connection, easy to solve electromagnetic shielding (EMI). Common ffc cables’ specifications are 0.5mm, 0.8mm, 1.0mm, 1.25mm, 1.27mm, 1.5mm, 2.0mm, 2.54mm and other various pitches to match different types of connectors. Rigid-flex PCB is a circuit board combined of rigid board and flexible circuit, from 2 layer to 50 layers, has the advantage of rigidness, flatness, flexibility and bendability. You can see advantage of rigid flex circuit such as design high density, less components need, less space, and stack up. Welcome to visit our website for rigid flex pcb manufacturers.